A. Chartered Engineer
B. Consulting Engineer
C. Irrigation Engineer
D. All are correct
Correct Answer: Consulting Engineer ✔
Last Updated: March 29, 2019
Related MCQs
- Sediment particles smaller than 0.002 mm which do not settle in water are called__________?
- Sliding failure occurs in a solid gravity dam when__________?
- The delta the total water requirement of crop from the time of sowing to harvesting the delta of sugarcane is __________?
- The delta the total depth of water consumed by a crop from 1st watering when matures, the delta for rice is__________?
- Rabi crops pertains to __________?
- Development of__________in river is due to meandering ?
- Weep holes are provided in canal lining to __________?
- The season that starts from 1st October and ends on 31st March, runs for 182 days is called __________?
- The ideal crop for wastewater or sewage irrigation is __________?
- When the reservoir is full, the maximum compressive force in a gravity dam is produced __________?
- The process of consolidation of stabilized earth work in canal or river embankments. In this process the soil is deposited in layers of specified thickness and at a particular moisture content is called __________?
- A watershed canal __________?
- Out/ of a well water is more than canal water because__________?
- Which of the following is a cash crop __________?
- Art of making saline un-cultivable lands capable of re-cultivation is called.__________?
- Art of growing crops, management of live stocks, husbandry and farming is called__________?
- if the depth of water in an open channel is greater than the critical depth, the flow is called__________?
- in most economical Trapezoidal section, half of the Top width is equal to __________?
- A channel is said lo be of most economical cross section, for a given cross-sectional area and bed slope when it __________?
- The total energy line lies over the hydraulic gradient line by an amount equal to__________?
- The discharge over a rectangular notch is determined by __________?
- For a perfect incompressible liquid flowing in a continuous stream, the total energy of a particle remain the same, while the liquid particle move from one point to another this statement is called __________?
- Flow in which each liquid particle has a definite path is called __________?
- A flow in which velocity of water particles is same at all sections is called __________?
- Piezometer tube is open to both ends mostly used to measure __________?
- The falling drop of rainwater become spherical due to __________?
- The weight per unit of liquid at standard Temperature and pressure is called__________?
- The ratio of specific weight of any liquid to the specific weight of water is called as __________?
- That part of the flow in a stream comes from sub-soil or valley, may be beneath the top surface of channel bed is called__________?
- The fixing of points in such away or the ground to have a correct lines for setting a canal or water course is called __________?
- In study of a granular material sliding on plane ground, the angle between the perpendicular and the surface in static condition is called __________?
- The piezometric level of water in the well at zero discharges is called__________?
- Volume of water that unit volume of aquifer will give up by gravity pull is called __________?
- An aquifer in which water contained under high pressure as the’ aquifer is sand witched between two impervious layer is called__________?
- __________% of total global water is saline and available in oceans ?
- Readily available moisture is the % of moisture that is always easily available to plant and this moisture is called __________?
- Water available in root zone of plants, is about 50% of soil moisture content. which is always available to the plants is called__________?
- Water storage efficiency in the root zone depends upon__________?
- Tanda dam is constructed on river __________?
- When reservoir is full on upstream side, the maximum stress comes upon__________?
- The steep conduits made in the body of dam for running turbines to generate hydro-electric power are called__________?
- The resultant pressure of water on the face of dam is equal to __________ ?
- Always flow inside the ground is __________?
- Sterilization is the process of killing __________ of water borne diseases, so as to make it safe for hospital use?
- The permissible limit of hardness of water fore low pressure boiler is __________?
- An escape constructed with masonry or pitched with stones to dispose off surplus of tank or reservoir is called__________?
- Surface tension is the property of a liquid which enables it to resist tensile stress. the surface tension of water is equal to __________ Kg/m?
- Specific gravity of a liquid is defined as the ratio of its specific weight to that of pure water and standard temperature and pressure. Therefore specific gravity is equal to __________?
- The dam built for the purpose of diverting water from main stream to various courses of flow is called __________?
- In case of silt deposition in the dam reservoir to dispose of the effectively __________ be used?
- To dispose of the surplus water from dam, a water way is constructed called__________?