A. Humidity
B. Absolute Humidity
C. relative humidity
D. All are correct
Correct Answer: Humidity ✔
Last Updated: March 29, 2019
Related MCQs
- A cloud is formed due to condensation. it consists of a small particle of ice an. small droplets of water, having diameter about __________microns?
- The percentage of culturable commended area, irrigated during the year to the total culturable commanded area on a outlet or channel is called__________?
- Hydraulic structures are designed for a safe flow of flood. The floods which are equal in designed magnitude life of the project is called __________?
- A particular flood which can occur in the basin in the worst meteorological and hydrological conditions is called __________?
- If a river or stream is collecting sediment and is building up dunes in its bed is called __________?
- A river before its joins the sea, gets divided into small channels, thus forming a Triangular shape called __________?
- In a river the flood water dries up before it joins the sea or any other river, such river is called __________?
- when ever a sloping face of river bank is protected by stone pitching against scour, the pitching is extended beyond the toe to the river side that is called__________?
- The groyne pointing upwards direction of flow is called __________?
- If the weir flood is designed continuous with divide piers as reinforced structure,such that the weight of divide piers, keep the structure safe against uplift, is called__________?
- The rise in river water level at up stream due to construction of weir is called__________?
- Silt free water should be supplied to the canals through__________?
- The wall of masonry or concrete, constructed at 90° to the axis of weir to separate normal weir from under sluices is called__________?
- A fish ladder is device by which flow energy can be dissipated in such a manner as to provide easy access to the downstream fish to come on upstream side, the velocity of flow varies from__________?
- In high floods, to avoid spilling of flood water over the gates, a wall is provided from pond level to high Flood level. This wall spans for the entire length of regulator, rest on piers, sustain water pressure by its weight called__________?
- The structures, which are constructed on the river bed upstream of head regulator. With this clear water enters in canal such structures are called__________?
- The depth before the jump is always less then the depth after the jump. The depth before the jump is called initial depth and depth after the jump is called__________?
- Mostly the hydraulic structures founded on __________ soils fails because of undermining and uplift pressure?
- At the end of hydraulic structure, the upward force of sub-soil water just becomes equal to the submerged weight of soil grains Then exit gradient will be called__________?
- Now- a -days the hydraulic structures are designed. Keeping in view the flow net, this was given by __________?
- To avoid scouring from end of structure, it is necessary to provide a __________ at the exit point?
- For strong Hydraulic jump containing maximum energy, the down stream glacis should be sloped at a slope of __________ to dissipate max: energy?
- When a weir is constructed, the downstream .bed of the river goes on eroding and consequently causes progressive lowering of the bed on downstream of weir called__________?
- The water way from a weir is determined by using Lacey’s wetted perimeter i.e. P=_______(Q)1/2 ?
- A water pool is designed on the down stream of the hydraulic structure to dissipate the energy of falling water by providing a water cushion called __________?
- A module or outlet in which discharge depends upon the difference of head between distributary and the water course is called __________?
- An outlet through which the discharge depends upon the water level in the distributary is called __________?
- The ratio of the rate of change of discharge through out let to the rate of c./v of water level of the distributary is called__________?
- When FSL of the canal is sufficiently below the bottom of the drain, so that water flows freely under gravity, such structures is called__________?
- A structure provided when a large canal a big drainage channel approach other practically at the same level is called__________?
- An open cut in the canal bank. with bed and sides to escape canal water through a lead channel to mix water in a nearby drain is called __________?
- The total dissolved solids in drinking water should not exceed__________?
- On relative basis, when one soil is eroded as compared to other soil under same conditions, this property is called __________?
- Darcy formula for loss of head in pipes is given by, hf=4fl v2 / __________?
- The aeration of water is done to remove __________?
- Velocity of flow in a sewer must be form __________ to ?
- A digging out of earth to make trench for any engineering purpose is called __________?
- The water in swimming pools can be __________ by using any one from the following, chlorine-ultraviolet rays and bromine t ?
- Mostly the salt of calcium and Magnesium can not cause __________?
- An open cut given in a canal bank, suitably protected by stone pitching to the upland drainage water into the canal is called __________?
- When FSL of the canal is sufficiently above the bed level of drainage so that canal flows under syphonis action, the structure is called __________?
- When the high flood level of the drain is sufficiently below the bed of the Canal that the drainage water flows freely under gravity, such structure is called__________?
- When the rate of change of discharge of outlet equals the rate of change of discharge of the channel, the out let is called __________?
- A module or outlet in which discharge is fixed and limited, irrespective fluctuations in water levels in distributary is called __________?
- The total length of impervious floor on down stream of the hydraulic structure is determined by Bligh’s Theory__________?
- The inverted filter consists layer of materials of increasing __________ from bottom to top?
- The invented filter is provided just after the end of concrete floor to reduce () possibility of __________?
- Khosla provided a seepage theory for design of Hydraulic structures called__________?
- According to Mr. Khosla, the seeping water creates undermining and the undermining starts from__________?
- To keep the Hydraulic structure safe against undermining the __________ should be safe?
- The loss of head H/ L is proportional to the length of creep. There fore the loss of head per unit creep length is called __________?