A. 100%
B. 95%
C. 75%
D. 20%
Correct Answer: 95% ✔
Last Updated: February 20, 2019
Related MCQs
- A first order reaction requires two equal sized CSTR. The conversion is__________?
- The optimum performance for reactors operating in parallel is obtained when the feed stream is distributed in such a way, that the__________?
- What is the order of a chemical reaction of the bellow figure, if the rate of formation of ‘C’, increases by a factor of 2.82 on doubling the concentration of ‘A’ and increases by a factor of 9 on trebling the concentration of ‘B’ ?
- Higher free energy of activation of a chemical reaction (at a given temperature) implies __________?
- As the chemical reaction proceeds, the rate of reaction __________?
- Integral method for analysing the kinetic data is used __________?
- A pulse tracer is introduced in an ideal CSTR (with a mean residence time I) at time, t = 0. The time taken for the exit concentration of the tracer to reach half of its initial value will be__________?
- Inversion of cane sugar is an example of __________?
- A typical example of an exothermic reversible reaction conducted at high pressure in industry is__________?
- Reaction rate of a first order reaction, which is half completed in 23 minutes will be __________?
- The reaction in which the rate equation corresponds to a stoichiometric equation, is called a/an __________ reaction?
- Chemical kinetics can predict the __________ of a chemical reaction?
- A reaction which is catalysed by an acid is also catalysed by any substance, which has a tendency to __________?
- The reactions with low activation energy are __________?
- Rate of an autocatalytic chemical reaction is a function of __________?
- Oil is hydrogenated using nickel catalyst in a __________ reactor?
- The reaction in which one of the products of reaction acts as a catalyst is called a/an __________ reaction?
- Which of the following is not endothermic in nature ?
- Differential method for analysing the kinetic data is used __________?
- For a tubular flow reactor with uniform concentration and temperature, the independent variable is__________?
- In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction ?
- The catalyst in a first order chemical reaction changes the__________?
- For a tubular reactor with space time ‘η’ and residence time ‘ζ’, the following statement holds good ?
- Kinetics of a solid catalysed reaction can best be studied in a __________ reactor?
- If ‘n’ is the order of reaction, then unit of rate constant is __________?
- A rise in temperature __________?
- BET apparatus is used to determine the __________?
- Effectiveness factor of a catalyst pellet is a measure of the __________ resistance?
- In the fluid catalytic cracker (FCC), the cracking reaction is (i) and the regeneration is (ii) __________?
- A chemical reaction, A → 3B, is conducted in a constant pressure vessel. Starting with pure A, the volume of the reaction mixture increases 3 times in 6 minutes. The fractional conversion is __________?
- In which of the following reactions, the equilibrium will shift to the right, if the total pressure is increased ?
- A plug-flow reactor is characterized by __________?
- The rate of a gas phase reaction is given by K . CA . CB. If the volume of the reaction vessel is reduced to l/4th of its initial volume, then the reaction rate compared to the original rate will be __________ times?
- In a CSTR __________ varies with time ?
- The enzyme which can catalyse the conversion of glucose to ethyl alcohol is __________?
- The rate constant of a reaction depends on the __________?
- The reaction A → B is conducted in an isothermal batch reactor. If the conversion of A increases linearly with holding time, then the order of the reaction is __________?
- The space time is equivalent to the holding time in a steady state mixed reactor for__________?
- For a zero order reaction, the concentration of product increases with the __________?
- The preferred reacting system for oxidation of o-xylene to phthalic anhydride is __________?
- The gas phase reaction 2A ⇌ B is carried out in an isothermal plug flow reactor. The feed consists of 80 mole % A and 20 mole % inerts. If the conversion of A at the reactor exit is 50%, then CA/CA0 at the outlet of the reactor is __________?
- Which of the following is the optimum operating condition for an exothermic reversible reaction taking place in a plug-flow reactor ?
- What is the order of a chemical reaction whose rate is deter-mined by the variation of one concentration term only ?
- When a catalyst increases the rate of chemical reaction, the rate constant__________?
- A reaction which is catalysed by a base is catalysed by all substances which have a tendency to__________?
- If ΔG (free energy change) for a chemical reaction is very large and negative, then the reaction is__________?
- __________ catalytic reaction is involved in the thermal cracking of gas oil ?
- The residence time distribution of an ideal CSTR is __________?
- Which of the following is not a unit of reaction rate ?
- Rate of a chemical reaction is independent of the concentration of the reactants for a __________ reaction?
- A batch reactor suffers from following disadvantage ?