Home
About Us
Contact Us
Privacy Policy
Search
Home
→
Chemical Reaction
→
For an isothermal second order aqueous phase reaction, A → B, the ratio of the time required for 90% conversion to the time required for 45% conversion is____________________?
Related MCQs
A photochemical reaction is __________?
For high conversion in a highly exothermic solid catalysed reaction, use a __________ bed reactor?
Sometimes, batch process is preferred over continuous process, when the product__________?
A reversible liquid phase endothermic reaction is to be carried out in a plug flow reactor. For minimum reactor volume, it should be operated such that the temperature along the length ?
A batch reactor is__________?
Radioactive decay follows __________ order kinetics?
The single parameter model proposed for describing non-ideal flow is the __________ model?
Photochemical reaction rate does not depend significantly on temperature, because__________?
A batch reactor is suitable for__________?
A backmix reactor__________?
For a solid catalysed chemical reaction, the effectiveness of solid catalyst depends upon the __________ adsorption?
In the reversible reaction of the type, A + B ⇌ AB, in general__________?
In case of physical adsorption, the heat of adsorption is of the order of __________ kcal/kg mole?
Which of the following is a controlling factor in very fast heterogeneous reaction ?
For a zero order chemical reaction, the__________?
An imbalanced chemical reaction equation is against the law of__________?
__________ is the response curve for a step input signal from a reactor ?
‘N’ plug flow reactors in series with a total volume ‘V’ gives the same conversion as a single plug flow reactor of volume ‘V’ for __________ order reactions?
Enzymes are destroyed, when the__________?
Ionic reactions occur in__________?
With decrease in temperature, the equilibrium conversion of a reversible endothermic reaction__________?
In a chemical reaction, __________ are conserved?
Sulphuric acid is used as a catalyst in the__________?
An autothermal reactor is__________?
Which of the following will favour the reverse reaction in a chemical equilibrium reaction ?
For a vapour phase catalytic reaction (A + B → P) which follows the Ridel mechanism and the reaction step is rate controlling, the rate of reaction is given by (reaction rate is irreversible, product also absorbs) ?
At a given temperature, K1, K2 and K3 are equilibrium constants for the following reactions 1, 2, 3 respectively. CH4(g) + H2O(g) ⇌ CO(g) + 3H2(g), CO(g) + H2O(g) ⇌ CO2(g) + H2(g) CH4(g) + 2H2O(g) ⇌ CO2(g) + 4H2(g) Then K1, K2 and K3 are related as ?
For reactions in parallel viz A → P (desired product) and A → Q (unwanted product), if the order of the desired reaction is higher than that of the undesired reaction, a__________?
A first order reaction requires two unequal sized CSTR. Which of the following gives higher yield ?
The rate of a chemical reaction is almost doubled for every 10°C rise in temperature. The rate will increase __________ times, if the temperature rises from 10 to 100°C?
For the liquid phase zero order irreversible reaction A → B, the conversion of A in a CSTR is found to be 0.3 at a space velocity of 0.1min-1. What will be the conversion for a PFR with a space velocity of 0.2 min-1? Assume that all the other operating conditions are the same for CSTR and PFR ?
When the density of the reaction mixture is constant in a chemical reaction, the ratio of the mean residence time to space time is__________?
A reaction in which one of the products of reaction acts as a catalyst is called a/an __________ reaction?
Which of the following is an independent variable for a batch tank reactor with uniform concentration and temperature ?
When all the limiting reactant is consumed in the reaction, the operational yield __________ the relative yield?
In flow reactors, the performance equations interrelate the rate of reaction to the__________?
In an ideal tubular-flow reactor__________?
In a/an __________ reactor, there is exchange of heat with the surroundings with sizeable temperature variation?
When a catalyst increases the rate of forward reaction, the value of rate constant__________?
For nearly isothermal operation involving large reaction time in a liquid-phase reaction, the most suitable reactor is a __________ reactor?
For a gaseous phase reaction, rate of reaction is equal to K. CA . CB. If the volume of the reactor is suddenly reduced to 1/4th of its initial volume, then the rate of reaction compared to the original rate will be __________ times?
The effect of increasing pressure on the gaseous equilibrium of the reaction 2X + 3Y ⇌ 3X + 2Y indicates that__________?
Signal normally used to study non-ideal flow by stimulus response technique is __________ input?
A high space velocity means that a given__________?
At a given value of E/R (ratio of activation energy and gas constant), the ratio of the rate constants at 500°K and 400°K is 2, if Arrhenius law is used. What will be this ratio, if transition state theory is used with the same value of „E/R‟ ?
Effective diffusivity (DE) in a catalyst pellet is related to molecular diffusivity (DN) and Knudsen diffusivity (DK) as__________?
Which of the following is not a chemical step in a fluid solid catalytic reaction ?
In a reversible chemical reaction having two reactants in equilibrium, if the concentration of the reactants are doubled, then the equilibrium constant will__________?
Catalyst carriers__________?
Rate determining step in a reaction consisting of a number of steps in series is the __________ step?
__________ is the controlling step in a highly temperature sensitive fluid-solid non-catalytic reaction ?
For an isothermal second order aqueous phase reaction, A → B, the ratio of the time required for 90% conversion to the time required for 45% conversion is____________________?
A. 2
B. 4
C. 11
D. 22
Correct Answer:
11
✔
Last Updated:
February 24, 2019