A. Film diffusion
B. Diffusion through ash layer
C. Chemical reaction
D. Either A., B. or C.
Correct Answer: Diffusion through ash layer ✔
Last Updated: February 20, 2019
Related MCQs
- A first order gaseous phase reaction is catalysed by a non-porous solid. The kinetic rate constant and the external mass transfer co-efficients are k and kg respectively. The effective rate constant (keff) is given by__________?
- Decomposition rate of a liquid ‘X’ which decomposes as per the reaction as shown in the bellow figure is given by__________?
- The sequence in which three CSTR’s of volumes 5, 10 and 15 m3 will be connected in series to obtain the maximum production in a second order irreversible reaction is __________?
- Given, 3H2 + CO = CH4 + H2O, KP = 101.84 and, 4H2 + CO2 = CH4 + 2H2O, KP = 101.17 the KP for the reaction CO + H2O = CO2 + H2 is __________?
- Which of the following is not a dimension-less group used in catalysis? (Where, D = dispersion co-efficient, cm2/sec.D1 = diffusion co-efficient; cm2/sec L = length of the reactor, cm t = time, sec, v = volumetric flow rate, cm3/sec. V = volume, cm3.) ?
- The conversion XA and residence time data are collected for zero order liquid phase reaction in a stirred tank reactor. Which of the following will be a straight line ?
- For the reaction as shown in the bellow figure, the rate of formation of Z is 0.2 gm mole/litre.hr. What is the rate of disappearance of X in gm mole/litre.hr ?
- The ‘E’ curve for a non-ideal reactor defines the fraction of fluid having age between t and t + dt __________?
- Molecularity of an elementary reaction, P + Q → R + S is __________?
- The exit age distribution of a fluid leaving a vessel (denoted by E) is used to study the extent of non-ideal flow in the vessel. The value of ∫∞ 0 E.dt is__________?
- Effectiveness factor E. of a catalyst pellet is defined as, E = (actual rate within pore of the catalyst)/(rate if not snowed by pore diffusion), Effectiveness factor for a first order reaction is given by (where, T = Thiele modulus) __________?
- Photo-chemical reactions occur in presence of __________?
- The conversion of a reactant, undergoing a first order reaction, at a time equal to three times the half life of the reaction is ?
- The heat of reaction__________?
- Space velocity__________?
- A chemical reaction occurs, when the energy of the reacting molecules is __________ the activation energy of reaction?
- For a __________ order reaction, the units of rate constant and rate of reaction are the same ?
- The conversion for a first order liquid phase reaction. A → B in a CSTR is 50%. If another CSTR of the same volume is connected in series, then the % conversion at the exit of the second reactor will be__________?
- For the same residence time, which one will give the maximum conversion ?
- The effectiveness factor for large value of Thiele modulus [L√(K/D1)] of a solid catalysed first order reaction is equal to (where, L = length of the reactor, cm, D1 = diffusion co-efficient, cm2/second) ?
- ‘Unreacted core model’ represents the reaction involving __________?
- The value of Steric factor ‘P’ in the equation k = PZeE/RT usually ranges from __________?
- Half life period of a first order irreversible reaction A → B is __________?
- A stirred tank reactor compared to tubular-flow reactor provides__________?
- The rate of an autocatalytic reaction as shown in the bellow figure, is given by – rA = k . CA . CB. In this case, the__________?
- Fluid flow in a real packed bed can be approximated as __________ model?
- The first order gas phase reaction as shown in the bellow figure is conducted isothermally in batch mode. The rate of change of conversion with time is given by__________?
- Three plug flow reactors (PFR’s) of 4, 5 & 6 m3 volumes are arranged in two branches as shown below in the figure. If the total feed rate is 300 tons/hr, then for the same conversion in each branch, the feed rate through branch II should be __________ tons/hr ?
- An irreversible first order reaction is being carried out in a CSTR and PFR of same volume. The liquid flow rates are same. The relative conversion will__________?
- For an ideal mixed flow reactor (CSTR), the exit age distribution E(t) is given by __________?
- In case of a P.F.R., there__________?
- The rate of the reaction, X → Y, quadruples when the concentration of ‘X’ is doubled. The rate expression for the reaction is, r = K Cx n, the value of ‘n’ in this case will be__________?
- The rate of a homogeneous reaction is a function of__________?
- For series reaction, the relative yield__________?
- In autocatalytic reactions ?
- The dispersion number of perfect mixed flow is__________?
- Which of the following does not produce a change in the value of rate constant of a reaction ?
- For identical flow rate, feed composition and for elementary first order reactions, ‘N’ equal sized mixed reactors in series with a total volume ‘V’ gives the same conversion as a single plug flow reactor of volume ‘V’ for constant density systems. This is true, when the value of ‘N’ is __________?
- The energy of activation of a chemical reaction ?
- If pore diffusion is the controlling step in a solid catalysed reaction, the catalyst__________?
- With the same reaction time, initial concentration and feed rate, the reaction 2A → B is carried out separately in CSTR and P.F. reactor of equal volumes. The conversion will be__________?
- Space time in flow reactor is__________?
- The rate of reaction does not decrease appreciably as the reaction proceeds in case of __________ reactions?
- The order of a chemical reaction is__________?
- The reaction rate almost gets doubled for 10°C rise in temperature. This is due to the fact that the__________?
- In an ideal P.F.R. at steady state conditions __________?
- Promoter__________?
- In the hydrodealkylation of toluene to benzene, the following reactions occur: C7H8 + H2 → C6H6 + CH4 2C6H6 ⇌ C12H10 + H2 Toluene and hydrogen are fed to a reactor in a molar ratio 1:5.80% of the toluene gets converted and the selectivity of benzene(defined as moles of benzene formed/moles of toluene converted) is 90%. The fractional conversion of hydrogen is__________?
- Vegetable oils are hydrogenated in a __________ reactor?
- B.E.T. method of finding out surface area of a catalyst, uses the extension of __________ isotherm?
- Half life period of a chemical reaction is proportional to CA0 -1, if the reaction is of __________ order?