A. Fluidised bed reactor
B. Moving bed reactor
C. Fixed bed reactor
D. None of these
Correct Answer: Moving bed reactor ✔
Last Updated: February 22, 2019
Related MCQs
- A chemical reaction is of zero order, when the reaction rate is (where, CA = concentration of reactant) ?
- According to the ‘law of mass action’, the rate of reaction is directly proportional to the__________?
- In a chemical reaction as shown in the bellow figure, it is observed that the (i) Rate of formation of ‘P’ is doubled on doubling the concentration of ‘X’ (ii) Rate of formation of ‘P’ is quadrupled on doubling the concentration of ‘Y’ (iii) Doubling the concentration of ‘Z’ does not affect the rate of formation of ‘P’ What is the order of the above chemical reaction ?
- With an increase in pressure in gaseous phase chemical reactions, the fractional conversion __________ when the number of moles decreases?
- A liquid phase reaction is to be carried out under isothermal conditions. The reaction rate as a function of conversion has been determined experimentally and is shown in the figure given below. What choice of reactor or combination of reactors will require the minimum overall reactor volume, if a conversion of 0.9 is desired ?
- What is the order of chemical reaction as shown in the bellow figure, if it is found that the reaction rate doubles on doubling the concentration of B and also the reaction rate doubles when the concentrations of both A & B were doubled and quadrupled when the concentrations of both B & C were doubled ?
- For the reaction, A + B → 2B + C,__________?
- The reaction rate constants at two different temperatures T1 and T2 are related by __________?
- The size of plug flow reactor (PFR) for all positive reaction orders and for any given duty, is __________ that of mixed reactor?
- For the liquid phase parallel reactions__________?
- Organic catalysts differ from the inorganic catalyst in the sense that the former is__________?
- For the gaseous reaction 2A → B, where the feed consists of 50 mole % A and 50 mole % inerts, the expansion factor is__________?
- The rate at which a chemical substance reacts is proportional to its__________?
- For any reaction, we may write conversion as a function of__________?
- When a high liquid hold up is required in a reactor for gas liquid reaction, use __________ column?
- Helium-mercury method is used for the measurement of the __________ of the catalyst?
- With increase in the space time of an irreversible isothermal reaction being carried out in a P.F. reactor, the conversion will__________?
- If the rate of a chemical reaction becomes slower at a given temperature, then the__________?
- For an isothermal variable volume batch reactor, the following relation is applicable for a first order irreversible reaction?
- Which of the following is a characteristic of an ideal plug flow reactor ?
- What is the order of a chemical reaction in which doubling the initial concentration of the reactants doubles the half life time of the reaction ?
- Collision theory gives the rate constant for bimolecular reaction as__________?
- For an ideal gas mixture undergoing a reversible gaseous phase chemical reaction, the equilibrium constant ?
- The order of the chemical reaction as shown in the bellow figure, whose rate equation is given as -rA = KCA__________?
- Maximum equilibrium conversion for endothermic reaction is obtained at the __________ temperature?
- A space velocity of 5 hr-1 means that __________?
- The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit conversion is 20%, then the exit temperature (in k) is (Data: Heat of reaction at 298 K = – 50000 kJ/ kmole of A reacted Heat capacities CPA = CPB = 100kJ/kmole. K (may be assumed to be independent of temperature)) ?
- For the non catalytic reaction of particles with surrounding fluid, the same needed to achieve the same fractional conversion for particles of different unchanging sizes is proportional to the particle diameter, when the __________ is the controlling resistance?
- For every 10°C rise in temperature, the rate of chemical reaction doubles. When the temperature is increased from 30 to 70°C, the rate of reaction increases __________ times?
- Which of the following resistances is not involved in a gas phase catalytic (gas-solid) reaction ?
- The minimum energy required to allow a chemical reaction to proceed is termed as the ‘threshold energy ‘. Chemical reactions with low activation energy are __________?
- A liquid decomposes by irreversible first order kinetics and the half life period of this reaction is 8 minutes. The time required for 75% conversion of the liquid will be __________ minutes?
- Fluidised bed reactor is characterized by__________?
- Velocity of a chemical reaction__________?
- Shift conversion reaction__________?
- The conversion for a second order, irreversible reaction (constant volume) as shown in the bellow figure, in batch mode is given by__________?
- Find a mechanism that is consistent with the rate equation and reaction given below ?
- In a semi-batch reactor __________?
- The catalytic converter for conversion of SO2 to SO3 by contact process should have a feed with SO2 content between__________?
- For a first order chemical reaction in a porous catalyst, the Thiele modulus is 10. The effectiveness factor is approximately equal to __________?
- The rate constant of a chemical reaction increases by 100 times when the temperature is increased from 400 °K to 500 °K. Assuming transition state theory is valid, the value of „E/R’ is __________?
- Most important characteristics of gas-liquid reactors are the__________?
- The reaction between oxygen and organic material is a/an __________ reaction?
- Which of the following is not a theory of homogeneous reaction ?
- 6 gm of carbon is burnt with an amount of air containing 18 gm oxygen. The product contains 16.5 gms CO2 and 2.8 gms CO besides other constituents. What is the degree of conversion on the basis of disappearance of limiting reactant ?
- A first order reaction requires two equal sized CSTR. The conversion is__________?
- The optimum performance for reactors operating in parallel is obtained when the feed stream is distributed in such a way, that the__________?
- What is the order of a chemical reaction of the bellow figure, if the rate of formation of ‘C’, increases by a factor of 2.82 on doubling the concentration of ‘A’ and increases by a factor of 9 on trebling the concentration of ‘B’ ?
- Higher free energy of activation of a chemical reaction (at a given temperature) implies __________?
- As the chemical reaction proceeds, the rate of reaction __________?
- Integral method for analysing the kinetic data is used __________?