A. Bright
B. Splint
C. Non-banded
D. Boghead
Correct Answer: Splint ✔
Last Updated: March 08, 2019
Related MCQs
- The function of secondary combustion air is to __________?
- Temperature of coke oven gas just before entering into saturator (for recovery of NH3) is about __________ °C?
- Producer gas containing least amount of tar is produced by the__________?
- Incomplete combustion of fuel in the furnace is judged by high __________ of the flue gases?
- Which of the following is used for making the explosive „TNT‟ ?
- Safe condition for storage of high V.M. bituminous coal is that __________?
- Flue gas from the heating chamber of by product coke ovens is removed by__________?
- Mineral matter, ‘M’ and ash percentage ‘A’ in coal are roughly related as__________?
- Calorific value of dry wood may be around __________ Kcal/kg?
- Combustion of pulverised coal as compared to that of lump coal __________?
- During coal carbonisation process, the conversion of semi-coke to coke is accompanied by an increase in the __________ of the mass?
- Coal tar fuel – 200 (CTF 200) is a mixture of __________?
- Sometimes water is sprayed during coal charging in the coke oven, which helps in __________?
- The sequence of absorption in flue gas analysis by Orsat’s apparatus is respectively__________?
- Improper storage condition results in the weathering of coal and spontaneous combustion, which increases its__________?
- Critical Air Blast (CAB) value of coke is a direct measure of its__________?
- A particular coal is said to be free burning when it __________?
- Ultimate analysis of coal determines its __________ content?
- Higher efficiency in the combustion of solid fuel cannot be achieved by__________?
- If oxygen content in the flue gas rises too high, fuel is being wasted by __________?
- During combustion of a gaseous fuel, the presence of a non-luminous flame is an indication of the__________?
- __________ process is meant for direct hydrogenation of coal to produce liquid fuel?
- One kg of carbon for theoretically complete combustion requires __________ kg of air?
- When incomplete combustion loss is high, the flue gas analysis shows large amount of __________?
- Naphthalene recovered from coke oven gas is used__________?
- Grindability index of a coal is 100. It implies that the __________?
- In high temperature carbonisation (as compared to low temperature carbonisation) of coal, the__________?
- Which of the following is not a manufactured fuel ?
- Prime coking coal is always blended with medium or non- coking coal before carbonisation__________?
- Low temperature carbonisation of coal takes place at __________ °C?
- With increase in calorific value of fuels, their adiabatic flame temperatures__________?
- Which of the following is not applicable to fluidised bed combustion of coal ?
- Efficiency of the combustion of a fuel is judged by the __________ the flue gas?
- Preheating of a gaseous fuel results in increased__________?
- Mineral matter content (M) and ash content A. in coal are approximately related as __________?
- Which of the following gaseous fuels is likely to have the highest gross calorific value ?
- Coke oven gas compared to blast furnace gas is__________?
- Which of the following reactions occuring during coal gasification is called the Neumann reversal reaction ?
- Calorific value of gobar gas (containing CH4 = 60% , H2 = 10% ; CO2 = 30%) may be about __________ Kcal/Nm3?
- Calorific value as determined by bomb calorimeter is the__________?
- Which adsorbent is used for removing sulphur compounds (S Q, H2S, RSH etc.) removal from coke oven gas in by-products recovery plant ?
- Which of the following fuels has the highest calorific value per unit mass (kcal/kg) ?
- Fusion point of coal ash generally varies from 1000 to 1700° C. Ash having fusion point less than __________ °C is liable to form clinker?
- The calorific value of natural gas is about __________ kcal/Nm3?
- High amount of sulphur and phosphorous in coke causes __________ ?
- A coal containing high amount of volatile matter will have__________?
- Coke oven gas is a better fuel than blast furnace gas, because of its higher__________?
- Which of the following is not a micro component present in coal ?
- Which of the following would require maximum amount of % excess air for complete combustion ?
- Coking time in a commercial high temperature coal carbonisation plant is about __________ hours?
- With increase in C/H ratio of a fuel, the dew point of flue gases__________?