A. Swelling characteristics
B. Abradability
C. Agglutinating properties
D. Resistance to impact breakage
Correct Answer: Swelling characteristics ✔
Last Updated: March 08, 2019
Related MCQs
- Furnace oil consumption in a furnace for a given duty employing preheated combination air (at 300°) may be reduced by about __________ percent as compared to the use of atmospheric combustion air?
- In low temperature carbonisation of coal, the__________?
- Which of the following is a single stage, fixed bed high pressure coal gasification process ?
- Blast furnace gas constitutes mainly of__________?
- Pure carbon is completely burnt in oxygen. The flue gas analysis is 70%CO2, 20%CO and 10%O2. The percent excess oxygen used is __________?
- Washing of coal does not reduce its__________?
- Preheating of coal charge for the coke ovens reduces the __________?
- Which of the following gaseous fuels has the highest net calorific value (kcal/Nm3) ?
- Width of the coke oven towards coke side is slightly more than that on pusher side to__________?
- Natural draught produced by a chimney depends upon the __________?
- Highly reactive coke have lower __________?
- __________ prohibits the use of alcohols directly in petrol engines ?
- Volumetric ratio of N2 to O2 in dry atmospheric air is __________?
- Bituminous coal__________?
- Washing of coal __________?
- Coalification means the __________?
- The ratio of % total carbon obtained in the ultimate analysis of coke and % fixed carbon obtained in the proximate analysis is always __________?
- Low temperature oxidation and spontaneous combustion of freshly mined coal is accentuated, if __________?
- If the specific heat of gaseous products of combustion of a fuel is high, the abiabatic flame temperature will be__________?
- The main advantage of forced draft over natural draft is that__________?
- Oxygen percentage (by weight) in atmospheric air is__________?
- Gasification of the solid fuel converts its organic part into combustible by interaction with air/oxygen and steam so as to obtain a secondary gaseous fuel of high calorific value having no ash. Gasification reactions are normally carried out at about __________ °C?
- Oxygen content in a flue gas was found to be 4%. It implies that excess air used for combustion was around __________ percent?
- Which of the following is not a by-product fuel ?
- Sulphur in metallurgical coal__________?
- Fusion point of coal ash increases with increase in its __________ content?
- Calorific value of coke oven gas is around __________ Kcal/Nm3?
- Caking index of coal blend used for blast furnace coke making is about__________?
- A coal with high ash content__________?
- Which of the following is not a binder for coal briquetting ?
- Coking time in beehive coke oven is about __________?
- Which of the following is not increased by using preheated combustion air in place of ordinary air at room temperature ?
- The heat of combustion of a fuel__________?
- KOH solution used in Orsat apparatus absorbs__________?
- In high temperature carbonisation of coal compared to low temperature carbonisation ?
- Presence of free moisture in coal during its high temperature carbonisation __________?
- The optimum percentage of excess air for combustion depends upon the __________ of the fuel?
- Pick out the wrong statement ?
- Pick out the wrong statement ?
- Pick out the wrong statement ?
- Pick out the correct statement ?
- Pick out the wrong statement ?
- Pick out the wrong statement ?
- ‘Wobbe index’ is a characteristic of__________?
- Spontaneous combustion of coal on storage results due to__________?
- White flue gas (resembling steam) coming out of the chimney of a thermal power plant indicates that the fuel used in the boiler furnace is__________?
- As the equilibrium moisture content of the coal increases, its__________?
- Which of the following is not used as a binder in coal briquetting ?
- Which of the following fuel gases has the highest calorific value ?
- In Orsat’s apparatus, ammoniacal cuprous chloride is used for selectivity absorbing__________?
- Which of the following is the most reactive (as regards the formation of CO + H2 from C + H2O) ?