A. Liquid-liquid extraction
B. Leaching
C. Absorption
D. None of these
Correct Answer: Leaching ✔
Last Updated: February 17, 2019
Related MCQs
- The equipment used in the extraction of highly corrosive radioactive liquids is__________?
- With increase in temperature, the solubility of gases in liquids, at fixed pressure__________?
- Degree of freedom for leaching and solvent extraction process is__________?
- Unit operation involved in the prilling of urea is__________?
- In physical terms, Schmidt number means __________?
- At __________ reflux, theoretical number of plates in a distillation coloumn is calculated using Fenske-Underwood equation?
- In case of an unsaturated mixture of gas and vapor, the percentage saturation is __________ its relative saturation?
- Flash distillation is suitable for separating the constituents of a binary system, which __________?
- In which of the following unit operations, the selectivity is an important parameter ?
- A coalescer in a mixer-settler liquid-liquid extraction column__________?
- During constant rate drying period, vaporisation rate per unit drying surface area __________?
- In a distillation column, with increase in the reflux ratio, the heat removed in the cooler __________?
- The feed to fractionating column is changed from saturated vapour to saturated liquid. If the separation and reflux ratio remains unchanged, the number of ideal stages will__________?
- In most of the vacuum crystalliser, vacuum is generally produced by means of a__________?
- __________ is concerned with the adsorption equilibria?
- ‘ADDUCTS’ and ‘CLATHRATES’ are used in case of__________?
- The percentage humidity is less than the relative humidity only at __________ percent humidity?
- At constant pressure, with increase of temperature, the dew point will __________?
- NSc/NPr is called the__________?
- The Schmidt number which is defined as, μ/ρ D, is the ratio of the__________?
- An aqueous solution of methanol is to be distilled in a tray column. High pressure steam is available as a source of heat. For a given reflux ratio and overhead composition, two options are being explored; (i) a reboiler is used and (ii) no reboiler is used but steam is fed directly to the bottom of the column. As compared to option (i), in option (ii) __________?
- In stripping section of continuous distillation column, the__________?
- The suitable evaporator for concentration of foaming liquids is a __________ evaporator?
- Mass transfer co-efficient varies as DAB 0.5, according to the __________ theory?
- The solvent used in liquid extraction should not have high latent heat of vaporisation, because __________?
- Absorption accompanied by heat evolution results in__________?
- Component A is diffusing in a medium B. The flux NA relative to a stationary point is equal to the flux due to molecular diffusion, if__________?
- With increase in temperature, the rate of extraction in leaching (solid-liquid extraction system) ?
- In case of an ideal solution, the total vapor pressure varies __________ with the composition expressed as mole fraction?
- Flooding in a distillation column is detected by a sharp __________?
- Which of the following operations does not involve leaching ?
- Diameter to height ratio for a raschig ring is__________?
- With decrease in the throughput (compared with the design capacity) for a bubble cap distillation column, its efficiency__________?
- For experimental determination of mass transfer co-efficient by wetted wall tower, the mass transfer area is__________?
- Mass transfer co-efficient is directly proportional to DAB 0.5, according to __________ theory ?
- Which of the following gas-liquid contacting devices incurs the least pressure drop for a particular duty ?
- Compound A is extracted from a solution of A + B into a pure solvent S. A Co-current unit is used for the liquid-liquid extraction. The inlet rate of the solution containing A is 200 moles of B/hr.m2 and the solvent flow, rate is 400 moles of S/m2. hr. The equilibrium data is represented by Y = 3X2 , where Y is in moles of a A/moles of B and X is in moles A/moles of S. The maximum percentage extraction achieved in the unit is__________?
- According to the film theory of mass transfer, the mass transfer co-efficient is proportional to (where, D = molecular diffusivity) ?
- For a distillation column operating at minimum reflux, the__________?
- __________ diffusion is used for separating the isotopes of methane ?
- For a fixed number of ideal stages in a distillation column, as the reflux ratio is increased, the difference in composition between the top and bottom product streams__________?
- The relative saturation of a partially saturated mixture of vapour and gas can be increased by __________ of the mixture?
- Steam distillation is used for separation of high boiling __________?
- When both the fluids flow concurrently in an absorber, the slope of the operating line is__________?
- The McCabe ΔL law states that the__________?
- Very tall packed towers are divided into series of beds to__________?
- Separation of the isotopes of helium for scientific investigations is done by__________?
- Flash distillation is suitable for the separation of components__________?
- If „f’ is defined as above, then which of the following applies to a feed at dew point ?
- According to Chilton-Colburn analogy for mass transfer, NSt.NSc 2/3 is equal to__________?
- Wet bulb and dry bulb temperatures becomes identical at __________ percent saturation curve?