A. Aromatics
B. Paraffins
C. Olefins
D. Naphthenes
Correct Answer: Naphthenes ✔
Last Updated: March 02, 2019
Related MCQs
- Highest quality bitumen is produced from the __________ crude oil?
- Molecular weight of petrol may be about __________?
- A typical yield of kerosene in straight run distillation of crude oil may be about __________ percent?
- Casing head gasoline is the liquid __________?
- The pressure (kg/cm2) and temperature (°C) maintained in electrical desalters for crude oil are respectively__________?
- A good lubricant should have high __________ ?
- Name the hydrocarbon having the poorest oxidation stability ?
- Phenols are added in gasoline to__________?
- Paraffin base crude oil as compared to asphalt base crude gives__________?
- Flash point of an oil gives an idea of the__________?
- Ethyl mercaptan is added to the Doctor negative LPG for facilitating the detection of its leakage (by bad odour) to the extent of about __________ ppm?
- The reservoir rock containing petroleum has__________?
- Which is an anticing compound ?
- Polymerisation__________?
- Which of the following constituents present in petroleum is responsible for ash formation ?
- Aniline point is a property of the__________?
- Clay treatment of petroleum products __________?
- The main reaction in reforming is the __________?
- Percentage of straight run gasoline in a typical crude oil may be around__________?
- Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight?
- The terminology used for the bottom most product from the vacuum crude distillation unit is__________?
- Waxes present in petroleum products__________?
- Pyrolysis of kerosene or natural gasoline is done to produce mainly the__________?
- Which of the following is the most important property for a jet fuel ?
- Though increased pressure has a retarding effect on cracking reaction, yet in actual process, a positive pressure of 10-15 kgf/cm2 is maintained during cracking mainly to__________?
- Crude oil is transported inland from oil field to refineries, mainly by the __________?
- Flash point of atmospheric distillation residue is determined by __________ apparatus?
- Diesel used in naval applications has a minimum cetane number of __________?
- The proper arrangement of the petroleum fractions in order of their boiling points is __________ ?
- The coking process normally mostly used in Indian oil refineries is the __________ coking process ?
- Equal volumes of aniline and diesel oil when mixed at room temperature (during summer) was found to be completely miscible. It means that the aniline point of the diesel is __________ the room temperature?
- The octane number of aviation gasoline may be __________?
- Sulphur content in lighter and heavier petroleum products is generally determined respectively by __________?
- True boiling point apparatus is used for the__________?
- Which one is used to determine the colour of petroleum products ?
- Tanks used for the storage of petroleum products (which are inflammable) should be painted with a __________ paint?
- Butadiene is a/an__________?
- The main use of heavy gas oil produced by the vacuum distillation unit is as a__________?
- The most widely used crude topping column in refineries is the __________ column?
- Most commonly used crude heater before the fractionation tower in a refinery is the __________ heater?
- Glycol added to petrol acts as a/an __________ agent ?
- Maximum sulphur percentage in low sulphur heavy stock (LSHS) furnace oil is about__________?
- Antioxidants are added in petrol to __________?
- Pick out the wrong statement about the smoking tendency of various hydrocarbon constituents of kerosene ?
- Mercaptans is represented as (where R and R’ are alkyl groups) __________?
- Cetane number of alpha methyl naphthalene is assumed to be__________?
- Which of the following is desirable in diesel and kerosene but is undesirable in gasoline ?
- Flash point of diesel/kerosene (>50°C) is determined by the__________?
- Naphthenic acid is a/an __________ compound?
- LPG when brought to atmospheric pressure & temperature will be a__________?
- Gum formation in stored gasoline is mainly due to the __________?