A. Naphtha
B. Petrol
C. Kerosene
D. Heavy fuel oil
Correct Answer: Heavy fuel oil ✔
Last Updated: March 02, 2019
Related MCQs
- Solvent used for dewaxing of petroleum products are__________?
- The general formula of naphthenes is__________?
- Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with __________?
- Extractor temperature is maintained at -20°C in Edeleanu process to reduce the __________ of kerosene?
- Vacuum maintained in the vacuum distillation column in oil refinery is in the range of about __________ mm Hg absolute?
- Paraffins are desirable in lubricating oil, as it has got high__________?
- Platforming is a __________ process?
- With increase in the molecular weight of aromatic present in kerosene, its smoking tendency ?
- Which of the following is a non-regenerative fixed bed catalytic reforming process ?
- Presence of predominantly large quantity of aromatics (polynuclear) is not desirable in aviation fuel, because it has__________?
- Which of the following is desirable in petrol (gasoline) but undesirable in kerosene ?
- Which of the following factors does not govern the mechanism of petroleum formation from organic sources ?
- Maximum viscosity of tar/PCM/fuel oil for easy and efficient atomisation in conventional burner is __________ centistokes (or 100 Redwood I seconds) ?
- Aromatics have the highest __________ of all the hydrocarbons of same carbon atoms?
- Lane and Garton classification of petroleum is based on its __________?
- Road grade bitumen is produced from vacuum residue by its __________?
- Products drawn from the top to bottom of the crude oil distillation column has progressively increasing __________?
- Iso-octane is used as a reference substance in the definition of octane number and it is assigned an octane number value of 100. Iso-octane is chemically known as __________?
- Cetane number of a diesel fuel is the measure of its__________?
- Water content in the crude oil as it comes out of oil well may be upto __________ percent?
- Tetraethyl lead is added to the petrol to increase its octane number, because its octane number is __________?
- Aniline point is the temperature at which__________?
- Asphalts are __________?
- “Breathing loss” on storage of gasoline occurs due to the __________?
- Thermofor catalytic cracking process is a __________ process?
- __________ treatment is done for appreciable improvement in viscosity index of lubricating oil?
- Water separometer index (modified) (WSIM) of a petrofuel is the measure of its__________?
- Sweetening of petroleum product means the removal of __________?
- Aniline point of high speed diesel may be about __________ °C ?
- Which of the following theories of origin of petroleum does not explain the presence of nitrogen & sulphur compounds in crude oil ?
- Octane number (unleaded) of reformed gasoline may be upto __________?
- Which of the following gasoline (unleaded) has the least octane number ?
- A multigrade lubricating oil means an oil having high __________?
- Reforming__________?
- Feed for reforming is generally__________?
- H/C ratio (by weight) for the same number of carbon atoms is the highest in case of__________?
- Highest quality bitumen is produced from the __________ crude oil?
- Molecular weight of petrol may be about __________?
- A typical yield of kerosene in straight run distillation of crude oil may be about __________ percent?
- Casing head gasoline is the liquid __________?
- The pressure (kg/cm2) and temperature (°C) maintained in electrical desalters for crude oil are respectively__________?
- A good lubricant should have high __________ ?
- Name the hydrocarbon having the poorest oxidation stability ?
- Phenols are added in gasoline to__________?
- Paraffin base crude oil as compared to asphalt base crude gives__________?
- Flash point of an oil gives an idea of the__________?
- Ethyl mercaptan is added to the Doctor negative LPG for facilitating the detection of its leakage (by bad odour) to the extent of about __________ ppm?
- The reservoir rock containing petroleum has__________?
- Which is an anticing compound ?
- Polymerisation__________?
- Which of the following constituents present in petroleum is responsible for ash formation ?