A. alumina
B. silica
C. iron
D. magnesia
Correct Answer: silica ✔
Last Updated: January 09, 2019
Related MCQs
- Excess of silica in brick earth results in__________?
- The nominal size of the modular brick is__________?
- The percentage of alumina in a good brick earth lies between__________?
- Percentage of silica in a good brick earth lies between__________?
- Excess of alumina in brick earth makes the brick__________?
- The age of a tree can be known by examining__________?
- Crushing strength of a first class brick should not be less than__________?
- The practical limit of moisture content achieved in air drying of timber is__________?
- The trunk of tree left after cutting all the branches is known as__________?
- Plywood is made by bonding together thin layers of wood in such a way that the angle between grains of any layer to grains of adjacent layers is__________?
- A first class brick when immersed in cold water for 24 hours should not absorb water more than__________?
- The main function of alumina in brick earth is__________?
- First class timber has an average life of__________?
- The plywood__________?
- Plywood has the advantage of__________?
- The moisture content in a well seasoned timber is__________?
- Assertion A : Shishum is used for decorative woodwork. Reason R : Shishum can be polished to an excellent finish. Select your answer according to the coding system given below ?
- Which of the following represents a metamorphic rock? (1) slate (2) shale (3) quartzite . The correct answer is__________?
- In which of the following directions, the strength of timber is maximum ?
- The disease of dry rot in timber is caused by__________?
- The radial splits which are wider on the outside of the log and narrower towards the pith are known as__________?
- Which of the following trees yields hard wood ?
- In which of the following pairs both trees yield soft wood ?
- Sapwood consists of__________?
- Which of the following timbers is suitable for making sports goods ?
- Spalling hammer is used for__________?
- Crushing strength of a good building stone should be more than__________?
- Cross cut saw is used for__________?
- Specific gravity for most of the building stones lies between__________?
- Which of the following stone is best suited for construction of piers and abutments of a railway bridge ?
- Based on the following rocks and minerals, select the correct statement, quartz, shale, basalt, granite, marble, gypsum, mica__________?
- The preparation of surface of stone to obtain plain edges or to obtain stones of required size and shape is known as__________?
- Granite is not suitable for ordinary building purpose because__________?
- The important test to be conducted on a stone used in docks and harbors is__________?
- Which of the following metamorphic rocks has the most weather resisting characteristics ?
- The stone suitable for rubble masonry should be__________?
- Quartitze is a__________?
- Which of the following sedimentary rocks changes into quartzite by metamorphic action ?
- Sandstone is a __________?
- A good building stone should not absorb water more than__________?
- Jumper is a tool used for__________?
- The predominant constituent which is responsible for strength in granite is__________?
- Which of the following has more fire resisting characteristics ?
- Slate is formed by metamorphic action on__________?
- Which of the following is a rock ?
- Gypsum is a__________?
- Which of the following is a mineral ?