A. 90° with the face of the dock
B. 45° with the face of the dock
C. 30° with the face of the dock
D. 10° with the face of the dock
Correct Answer: 10° with the face of the dock ✔
Last Updated: January 19, 2019
Related MCQs
- A ship is berthed in a chamber and lifted by principles of buoyancy Such a chamber is called__________?
- For designing the dock, the proportion of ship load assumed to be borne by keel blocks is__________?
- Which of the following structures protects the shore by trapping of littoral drift?
- Assertion A : Large size stones are required in stone revetment in shore protection. Reason R : Resistance of stone to wave force is proportional to its volume and wave force is proportional to the exposed area of the stone?
- Which of the following structures are constructed parallel to shore line to develop a demarcating line between land area and water area ?
- Which of the following is a fixed type mooring accessory ?
- In multiple point mooring system, vessel is secured to minimum of__________?
- If the maximum spring rise is 2 m and height of the waves expected is 4 m , then the breakwater height above the datum will be__________?
- As compared to wall type breakwater, mound type breakwater__________?
- Minimum width of ship clearance shall be__________?
- At a given port, the fetch is 400 nautical miles, the maximum height of storm wave will be__________?
- Assertion A : Intervention of undulations in the sea bed reduces the depth of wave at the section. Reason R : No wave can have a height greater than the depth of water through which it passes?
- As per Stevenson’s empirical formula, the approximate value of the height of the wave in metres is given by__________?
- The minimum diameter of turning besin, where ships turn by going ahead and without tug assistance should be__________?
- When a ship floats at its designed water line, the vertical distance from water line to the bottom of the ship is known as__________?