A. 0.6 Hs and 1.67 Hs
B. 0.6 Hs and 1.87 Hs
C. 1.27 Hs and 1.87 Hs
D. 1.27 Hs and 1.67 Hs
Correct Answer: 0.6 Hs and 1.87 Hs ✔
Last Updated: January 19, 2019
Related MCQs
- Assertion A : Basin walls have to be of much grater height than dock walls. Reason R : Tidal basins are subject to fluctuations of levels due to tidal variations?
- Consider the following statements in regard to Beaufort scale for wind speeds__________?
- Dead weight tonnage of a ship__________?
- The maximum harbour depth below lowest low water is generally equal to__________?
- Assertion A : Depth and width required at the entrance to a harbour are more than those required in the channel. Reason R : The entrance to a harbour is usually more exposed to waves as compared to the harbour itself__________?
- In basins subjected to strong winds and tide, the length of the berthing area should not be less than__________?
- As per Berlin’s formula, the length of wave in metres is given by__________?
- In a two lane channel, bottom width of channel is given by__________?
- Select the incorrect statement ?
- The difference in height between highest high water and lowest low water is called__________?
- If H is the height of the wave expected, then the height of the breakwater is generally taken as__________?
- By increasing the rise of lockgates__________?
- The significant wave height is defined is the average height of the__________?
- When a wave strikes a vertical breakwater in deep water, it is reflected back and on meeting another advancing wave of similar amplitude merges and rises vertically in a wall of water. This phenomenon is called__________?
- Which of the following type of sea walls results in greatest protection of shore structures?
- Which of the following are repair docks ?
- Which of the following conditions of loading imposes the greatest load on the foundation in case of dry docks?
- A ship strikes the berth generally at an angle__________?
- A ship is berthed in a chamber and lifted by principles of buoyancy Such a chamber is called__________?
- For designing the dock, the proportion of ship load assumed to be borne by keel blocks is__________?
- Which of the following structures protects the shore by trapping of littoral drift?
- Assertion A : Large size stones are required in stone revetment in shore protection. Reason R : Resistance of stone to wave force is proportional to its volume and wave force is proportional to the exposed area of the stone?
- Which of the following structures are constructed parallel to shore line to develop a demarcating line between land area and water area ?
- Which of the following is a fixed type mooring accessory ?
- In multiple point mooring system, vessel is secured to minimum of__________?
- If the maximum spring rise is 2 m and height of the waves expected is 4 m , then the breakwater height above the datum will be__________?
- As compared to wall type breakwater, mound type breakwater__________?
- Minimum width of ship clearance shall be__________?
- At a given port, the fetch is 400 nautical miles, the maximum height of storm wave will be__________?
- Assertion A : Intervention of undulations in the sea bed reduces the depth of wave at the section. Reason R : No wave can have a height greater than the depth of water through which it passes?
- As per Stevenson’s empirical formula, the approximate value of the height of the wave in metres is given by__________?
- The minimum diameter of turning besin, where ships turn by going ahead and without tug assistance should be__________?
- When a ship floats at its designed water line, the vertical distance from water line to the bottom of the ship is known as__________?