A. Collapsible gates with rails
B. Rolling shutters
C. Expanded metal wire netting
D. M.S. reinforcement of R.C.C. works
Correct Answer: D. M.S. reinforcement of R.C.C. works ✔
Last Updated: January 20, 2019
Related MCQs
- The ‘centre line method’ is specially adopted for estimating__________?
- The inspection pit or chamber is a manhole provided in a base drainage system__________?
- In case of laying gullies, siphons, intercepting traps, the cost includes__________?
- Carpet area does not include the area of__________?
- The expected out turn of 12 mm plastering with cement mortar is__________?
- The measurement is made for stone work in square metre in case of__________?
- The total length of a cranked bar through a distance D. at 45° in case of a beam of effective length L, is__________?
- The concrete work for the following part of the building of specified thickness is measured in square metres__________?
- A portion of an embankment having a uniform up-gradient 1 in 500 is circular with radius 1000 m of the centre line. It subtends 180° at the centre. If the height of the bank is 1 m at the lower end, and side slopes 2:1, the earth work involved ?
- Anti-siphonage pipe is connected to__________?
- The reduced levels of points, 30 metres apart along the longitudinal section of a road portion between chainages 5 and 9 are shown in the given figure. If there is a uniform up-gradient of the road 120 in 1, the chainage of the point with no filling or cutting is__________?
- The item of the brick structure measured in sq.m, is__________?
- According to ISI method of measurement, the order of the sequence is__________?
- The most reliable estimate is__________?
- While preparing a detailed estimate__________?
- The expected out turn of 2.5 cm cement concrete floor per mansion per day__________?
- Due to change in price level, a revised estimate is prepared if the sanctioned estimate exceeds__________?
- The measurement is not made in square metres in case of__________?
- The cost of the earthwork in excavation for the surface drain of cross-section shown in the given figure for a total length of 5 metres @ Rs. 450% cum, is__________?
- The trap which is provided to disconnect the house drain from the street sewer is called__________?
- Pick up the excavation where measurements are made in square metres for payment ?
- In long and short wall method of estimation, the length of long wall is the centre to centre distance between the walls and__________?
- The area is measured correct to the nearest__________?
- The expected out turn of cement concrete 1 : 2 : 4 per mason per day is__________?
- As per Indian Standard Specifications, the peak discharge for domestic purposes per capita per minute, is taken__________?
- The excavation exceeding 1.5 m in width and 10 sq.m in plan area with a depth not exceeding 30 cm, is termed as__________?
- The cross -section of a road partly in banking and partly in cutting is shown in the given figure. The area of the shaded portion is__________?
- For the construction of buildings, the subheads of the estimate are__________?
- Cost of fittings and their fixing is specified for the following sanitary fittings__________?
- The measurement is made in square metre in case of__________?
- The area of the cross-section of a road fully in banking shown in the given figure, is__________?
- The following item of earth work is not measured separately ?
- Pick up the correct statement regarding the centre line method of estimating a building?
- The rate of payment is made for 100 cu m (per % cu m) in case of__________?
- Brick walls are measured in sq. m if the thickness of the wall is__________?
- If the formation level of a highway has a uniform gradient for a particular length, and the ground is also having a longitudinal slope, the earthwork may be calculated by__________?
- A cement concrete road is 1000 m long, 8 m wide and 15 cm thick over the sub-base of 10 cm thick gravel. The box cutting in road crust is__________?
- In the mid-section formula__________?
- The cross -sections for a highway is taken at__________?
- According to Indian Standards Institute, the actual size of modular bricks is__________?
- The assumption on which the trapezoidal formula for volumes is based, is__________?
- The brick work is not measured in cu m in case of__________?
- While estimating the qualities for the construction of a building, the correct metric unit is__________?
- While estimating a reinforced cement structure, the omitted cover of concrete is assumed__________?
- The plinth area of a building not includes__________?
- The main factor to be considered while preparing a detailed estimate, is__________?
- The rate of an item of work depends on__________?