A. sides and proceed to centre
B. centre and proceed to sides
C. one side and proceed to other side
D. any of the above
Correct Answer: sides and proceed to centre ✔
Last Updated: January 12, 2019
Related MCQs
- The camber of shoulders in water bound macadam roads is__________?
- Most suitable material for highway embankments is__________?
- The most suitable equipment for compacting clayey soils is a__________?
- When the bituminous surfacing is done on already existing black top road or over existing cement concrete road, the type of treatment to be given is__________?
- For the construction of water bound macadam roads, the correct sequence of operations after spreading coarse aggregates is__________?
- The binder normally used in flexible pavement construction is__________?
- The aggregates required for one kilometer length of water bound macadam road per meter width and for 10 mm thickness is__________?
- Maximum daily traffic capacity of bituminous pavements is__________?
- The fundamental factor in the selection of pavement type is__________?
- The maximum thickness of expansion joint in rigid pavements is__________?
- If the group index value of subgrade is between 5 and 9, then the subgrade is treated as__________?
- The critical combination of stresses for corner region in cement concrete roads is__________?
- The maximum spacing of contraction joints in rigid pavements is__________?
- The function of an expansion joint in rigid pavements is to__________?
- Tie bars in cement concrete pavements are at__________?
- Rigidity factor for a tyre pressure greater than 7 kg/cm2 is__________?
- Select the correct statement__________?
- Tyre pressure influences the__________?
- The number of repetitions, which the pavement thickness designed for a given wheel load should be able to support during the life of pavement is__________?
- Bottom most layer of pavement is known as__________?
- For rapid curing cutbacks, the oil used is__________?
- RC-2, MC-2 and SC-2 correspond to__________?
- The maximum limit of water absorption for aggregate suitable for road construction is__________?
- The recommended grade of tar for grouting purpose is__________?
- Penetration test on bitumen is used for determining its__________?
- The method of design of flexible pavement as recommended by IRC is__________?
- Flexible pavement distribute the wheel load__________?
- Group index method of design of flexible pavement is__________?
- The group index for a soil, whose liquid limit is 40 percent, plasticity index is 10 percent and percentage passing 75 micron IS sieve is 35, is__________?
- Softening point of bitumen to be used for read construction at a place where maximum temperature is 40° C should be__________?
- Bitumen of grade 80/100 means__________?
- Which of the following represents hardest grade of bitumen ?
- The ductility value of bitumen for suitability in road construction should not be less than__________?
- The maximum allowable Los Angeles abrasion value for high quality surface course is__________?
- In CBR test the value of CBR is calculated at__________?
- Percentage of free carbon in bitumen is__________?
- If aggregate impact value is 20 to 30 percent, then it is classified as__________?
- Which of the following tests measures the toughness of road aggregates ?
- The direct interchange ramp involves__________?
- Los Angeles testing machine is used to conduct__________?
- In soils having same values of plasticity index, if liquid limit is increased, then__________?
- The most economical lighting layout which is suitable for narrow roads is__________?
- When the width of kerb parking space and width of street are limited, generally preferred parking system is__________?
- When a number of roads are meeting at a point and only one of the roads is important, then the suitable shape of rotary is__________?
- A traffic rotary is justified where__________?
- Maximum number of vehicles can be parked with__________?
- As per IRC recommendations, the average level of illumination on important roads carrying fast traffic is__________?
- The maximum number of vehicles beyond which the rotary may not function efficiently is__________?
- The entrance and exit curves of a rotary have__________?
- Centre line markings are used__________?
- When two equally important roads cross roughly at right angles, the suitable shape of central island is__________?