A. 15 mm
B. between 15 mm and 25 mm
C. 25 mm
D. greater than 25 mm
Correct Answer: 15 mm ✔
Last Updated: January 13, 2019
Related MCQs
- In the plate loading test for determining the bearing capacity of soil, the size of square bearing plate should be__________?
- Terzaghi’s general bearing capacity formula for a strip footing (C Nc + y D Nq + 0.5 Y NTB. gives__________?
- Allowable bearing pressure for a foundation depends upon__________?
- Coefficient of earth pressure at rest is__________?
- The effect of cohesion on a soil is to__________?
- Bishop’s method of stability analysis__________?
- A retaining wall 6m high supports a backfill with a surcharge angle of 10°. The back of the wall is inclined to the vertical at a positive batter angle of 5°. If the angle of wall friction is 7°, then the resultant active earth pressure will act at a distance of 2 m above the base and inclined to the horizontal at an angle of__________?
- The major principal stress in an element of cohesionless soil within the backfill of a retaining wall is__________?
- Rankine’s theory of earth pressure assumes that the back of the wall is__________?
- The angle that Coulomb’s failure envelope makes with the horizontal is called__________?
- In the triaxial compression test, the application of additional axial stress (i.e. deviator stress) on the soil specimen produces shear stress on__________?
- During the first stage of triaxial test when the cell pressure is increased from 0.10 N/mm2 to 0.26 N/mm2, the pore water pressure increases from 0.07 N/mm2 to 0.15 “N/mm2. Skempton’s pore pressure parameter B is__________?
- The coefficient of active earth pressure for a loose sand having an angle of internal friction of 30° is__________?
- Sensitivity of a soil can be defined as__________?
- In a triaxial compression test when drainage is allowed during the first stage (i. e. application of cell pressure) only and not during the second stage (i.e. application of deviator stress at constant cell pressure), the test is known as__________?
- If the shearing stress is zero on two planes, then the angle between the two planes is__________?
- If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is__________?
- A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m2 when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of internal friction for the soil are respectively__________?
- Shear strength of a soil is a unique function of__________?
- Unconfmed compressive strength test is__________?
- In a deposit of normally consolidated clay__________?
- Skempton’s pore pressure coefficient B for saturated soil is__________?
- The shear strength of a soil__________?
- For better strength and stability, the fine grained soils and coarse grained soils are compacted respectively as__________?
- For a loose sand sample and a dense sand sample consolidated to the same effective stress__________?
- With the increase in the amount of compaction energy__________?
- Direct measurement of permeability of the specimen at any stage of loading can be made__________?
- The ultimate consolidation settlement of a structure resting on a soil__________?
- A normally consolidated clay settled 10 mm when effective stress was increased from 100 kN/m2 to 200 kN/ m2. If the effective stress is further increased from 200 kN/ m2 to 400 kN/ m2, then the settlement of the same clay is__________?
- The ultimate consolidation settlement of a soil is__________?
- The maximum dry density upto which any soil can be compacted depends upon__________?
- Coarse grained soils are best compacted by a__________?
- Coefficient of compressibility is__________?
- Compressibility of sandy soils is__________?
- Clay layer A with single drainage and coefficient of consolidation Cv takes 6 months to achieve 50% consolidation. The time taken by clay layer B of the same thickness with double drainage and coefficient of consolidation Cv/2 to achieve the same degree of consolidation is__________?
- Which one of the following clays behaves like a dense sand ?
- Degree of consolidation is__________?
- Coefficient of consolidation for clays normally__________?
- Time factor for a clay layer is__________?
- Coefficient of consolidation of a soil is affected by__________?
- The most suitable method for drainage of fine grained cohesive soils is__________?
- Within the consolidation process of a saturated clay__________?
- The average coefficient of permeability of natural deposits__________?
- The value of compression index for a remoulded sample whose liquid limit is 50% is__________?
- The slope of isochrone at any point at a given time indicates the rate of change of__________?
- The flownet for an earthen dam with 30 m water depth consists of 25 potential drops and 5 flow channels. The coefficient of permeability of dam material is 0.03 mm/sec. The discharge per meter length of dam is__________?
- Total number of stress components at a point within a soil mass loaded at its boundary is__________?
- The total discharge from two wells situated near to each other is__________?
- Due to a rise in temperature, the viscosity and the unit weight of the percolating fluid are reduced to 60% and 90% respectively. If other things remain constant, the coefficient of permeability__________?
- Which of the following methods is more suitable for the determination of permeability of clayey soil ?
- Coefficient of permeability of soil__________?