Home
About Us
Contact Us
Privacy Policy
Search
Home
→
Soil Mechanics and Foundation Engineering
→
If the shearing stress is zero on two planes, then the angle between the two planes is________________?
Related MCQs
If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is__________?
A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m2 when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of internal friction for the soil are respectively__________?
Shear strength of a soil is a unique function of__________?
Unconfmed compressive strength test is__________?
In a deposit of normally consolidated clay__________?
Skempton’s pore pressure coefficient B for saturated soil is__________?
The shear strength of a soil__________?
For better strength and stability, the fine grained soils and coarse grained soils are compacted respectively as__________?
For a loose sand sample and a dense sand sample consolidated to the same effective stress__________?
With the increase in the amount of compaction energy__________?
Direct measurement of permeability of the specimen at any stage of loading can be made__________?
The ultimate consolidation settlement of a structure resting on a soil__________?
A normally consolidated clay settled 10 mm when effective stress was increased from 100 kN/m2 to 200 kN/ m2. If the effective stress is further increased from 200 kN/ m2 to 400 kN/ m2, then the settlement of the same clay is__________?
The ultimate consolidation settlement of a soil is__________?
The maximum dry density upto which any soil can be compacted depends upon__________?
Coarse grained soils are best compacted by a__________?
Coefficient of compressibility is__________?
Compressibility of sandy soils is__________?
Clay layer A with single drainage and coefficient of consolidation Cv takes 6 months to achieve 50% consolidation. The time taken by clay layer B of the same thickness with double drainage and coefficient of consolidation Cv/2 to achieve the same degree of consolidation is__________?
Which one of the following clays behaves like a dense sand ?
Degree of consolidation is__________?
Coefficient of consolidation for clays normally__________?
Time factor for a clay layer is__________?
Coefficient of consolidation of a soil is affected by__________?
The most suitable method for drainage of fine grained cohesive soils is__________?
Within the consolidation process of a saturated clay__________?
The average coefficient of permeability of natural deposits__________?
The value of compression index for a remoulded sample whose liquid limit is 50% is__________?
The slope of isochrone at any point at a given time indicates the rate of change of__________?
The flownet for an earthen dam with 30 m water depth consists of 25 potential drops and 5 flow channels. The coefficient of permeability of dam material is 0.03 mm/sec. The discharge per meter length of dam is__________?
Total number of stress components at a point within a soil mass loaded at its boundary is__________?
The total discharge from two wells situated near to each other is__________?
Due to a rise in temperature, the viscosity and the unit weight of the percolating fluid are reduced to 60% and 90% respectively. If other things remain constant, the coefficient of permeability__________?
Which of the following methods is more suitable for the determination of permeability of clayey soil ?
Coefficient of permeability of soil__________?
Effective stress is__________?
Which of the following methods is best suited for determination of permeability of coarse-grained soils ?
If the permeability of a soil is 0.8 mm/sec, the type of soil is__________?
The hydraulic head that would produce a quick condition in a sand stratum of thickness 1.5 m, specific gravity 2.67 and voids ratio 0.67 is equal to__________?
Effective stress on soil__________?
Physical properties of a permeant which influence permeability are__________?
According to IS classification, the range of silt size particles is__________?
If the water table rises upto ground surface, then the__________?
Highway Research Board (HRB) classification of soils is based on__________?
Rise of water table above the ground surface causes__________?
Quick sand is a__________?
The total and effective stresses at a depth of 5 m below the top level of water in a swimming pool are respectively__________?
The clay mineral with the largest swelling and shrinkage characteristics is__________?
Sand particles are made of__________?
Dispersed type of soil structure is an arrangement comprising particles having__________?
Inorganic soils with low compressibility are represented by__________?
If the shearing stress is zero on two planes, then the angle between the two planes is________________?
A. 45°
B. 90°
C. 135°
D. 225°
Correct Answer:
90°
✔
Last Updated:
January 13, 2019