A. type of sand
B. flow condition occurring in cohesive soils
C. flow condition occurring in cohesionless soils
D. flow condition occurring in both cohesive and cohesionless soils
Correct Answer: type of sand ✔
Last Updated: January 13, 2019
Related MCQs
- The total and effective stresses at a depth of 5 m below the top level of water in a swimming pool are respectively__________?
- The clay mineral with the largest swelling and shrinkage characteristics is__________?
- Sand particles are made of__________?
- Dispersed type of soil structure is an arrangement comprising particles having__________?
- Inorganic soils with low compressibility are represented by__________?
- If the material of the base of the Casagrande liquid limit device on which the cup containing soil paste drops is softer than the standard hard rubber, then__________?
- Which of the following soils has more plasticity index ?
- If the natural water content of soil mass lies between its liquid limit and plastic limit, the soil mass is said to be in__________?
- Toughness index is defined as the ratio of__________?
- At liquid limit, all soils possess__________?
- The water content of soil, which represents the boundary between plastic state and liquid state, is known as__________?
- The admixture of coarser particles like sand or silt to clay causes__________?
- When the plastic limit of a soil is greater than the liquid limit, then the plasticity index is reported as__________?
- If the plasticity index of a soil mass is zero, the soil is__________?
- According to Atterberg, the soil is said to be of medium plasticity if the plasticity index PI is__________?
- The hydrometer method of sedimentation analysis differs from the pipette analysis mainly in__________?
- Uniformity coefficient of a soil is__________?
- Which of the following is a measure of particle size range ?
- Stoke’s law is valid only if the size of particle is__________?
- A soil has a bulk density of 22 kN/m3 and water content 10 %. The dry density of soil is__________?
- For proper field control, which of the following methods is best suited for quick determination of water content of a soil mass ?
- In hydrometer analysis for a soil mass__________?
- A pycnometer is used to determine__________?
- If the sand in-situ is in its densest state, then the relative density of sand is__________?
- If the degree of saturation of a partially saturated soil is 60%, then air content of the soil is__________?
- The ratio of volume of voids to the total volume of soil mass is called__________?
- Which of the following methods is most accurate for the determination of the water content of soil ?
- Relative density of a compacted dense sand is approximately equal to__________?
- If the water content of a fully saturated soil mass is 100%, then the voids ratio of the sample is__________?
- If the volume of voids is equal to the volume of solids in a soil mass, then the values of porosity and voids ratio respectively are__________?
- Select the correct range of density index,ID __________?
- When the degree of saturation is zero, the soil mass under consideration represents__________?
- Valid range for S, the degree of saturation of soil in percentage is__________?
- Valid range for n, the percentage voids, is__________?
- Residual soils are formed by__________?
- Which of the following types of soil is transported by gravitational forces ?
- Voids ratio of a soil mass can__________?
- If the voids of a soil mass are full of air only, the soil is termed as__________?
- Constant head permeameter is used to test permeability of__________?
- Water content of soil can__________?
- A fully saturated soil is said to be__________?