A. semi-conductors
B. D. C. circuits
C. small resistors
D. high currents
Correct Answer: semi-conductors ✔
Last Updated: June 28, 2018
Related MCQs
- Which method can be used for absolute measurement of resistances __________?
- Three 6 ohm resistors are connected to form a triangle. What is the resistance between any two corners __________?
- Three identical resistors are first connected in parallel and then in series. The resultant resistance of the first combination to the second will be__________?
- International ohm is defined in terms of the resistance of__________?
- A substance whose molecules consist of dissimilar atoms is called__________?
- A field of force can exist only between__________?
- When resistance element of a heater fuses and then we reconnect it after removing a portion of it, the power of the heater will__________?
- Copper wire of certain length and resistance is drawn out to three times its length without change in volume, the new resistance of wire becomes__________?
- 74. Sparking occurs when a load is switched off because the circuit has high_________?
- Switching of a lamp in house produces noise in the radio. This is because switching operation produces________?
- For testing appliances, the wattage of test lamp should be__________?
- Bulbs in street lighting are all connected in__________?
- When electric current passes through a bucket full of water, lot of bubbling is observeD. This suggests that the type of supply is__________?
- In the case of direct current__________?
- Two lamps 100 W and 40 W are connected in series across 230 V (alternating). Which of the following statement is correct ?
- In a lamp load when more than one lamp are switched on the total resistance of the load__________?
- When one leg of parallel circuit is opened out the total current will__________?
- It becomes more difficult to remove__________?
- Whether circuit may be AC. or D. C. one, following is most effective in reducing the magnitude of the current?
- A glass rod when rubbed with silk cloth is charged because__________?
- Two bulbs of 500 W and 200 W rated at 250 V will have resistance ratio as________?
- When electric current passes through a metallic conductor, its temperature rises. This is due to__________?
- If the efficiency of a machine is to be high, what should be low __________?
- Resistance of a material always decreases if__________?
- Electric current passing through the circuit produces__________?
- An electric filament bulb can be worked from__________?
- In an electric kettle water boils in 10 m minutes. It is required to boil the boiler in 15 minutes, using same supply mains__________?
- A 40 W bulb is connected in series with a room heater. If now 40 W bulb is replaced by 100 W bulb, the heater output will__________
- Which of the following quantities remain the same in all parts of a series circuit __________?
- The thickness of insulation provided on the conductor depends on__________?
- The insulation on a current carrying conductor is provided__________?
- The hot resistance of the bulb’s filament is higher than its cold resistance because the temperature co-efficient of the filament is__________?
- A closed switch has a resistance of__________?
- Two resistances Rl and Ri are connected in series across the voltage source where Rl>Ri. The largest drop will be across__________?
- The four bulbs of 40 W each are connected in series swift a battery across them, which of the following statement is true__________?
- Three 60 W bulbs are in parallel across the 60 V power line. If one bulb burns open__________?
- If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes__________?
- If a parallel circuit is opened in the main line, the current__________?
- The resistance of a few meters of wire conductor in closed electrical circuit is__________?
- Which of the following statement is true__________?
- A 3 Q resistor having 2 A current will dissipate the power of__________?
- The filament of an electric bulb is made of__________?
- In a series circuit with unequal resistances__________?
- The minimum charge on an ion is__________?
- The rating of a fuse wire is always expressed in__________?
- Insulating materials have the function of__________?
- Insulating materials have the function of__________?
- Varistors are__________?
- Which one of the following does not have negative temperature co-efficient __________?
- A resistance having rating 10 ohms, 10 W is likely to be a__________?
- All of the following are equivalent to watt except__________?