A. oscillating magnetic field
B. pulsating magnetic flux
C. relative rotation between field and armature
D. all above
Correct Answer: relative rotation between field and armature ✔
Last Updated: July 05, 2018
Related MCQs
- D.C. generators are connected to the busbars or disconnected from them only under the floating condition__________?
- Armature reaction of an unsaturated D.C. machine is__________?
- If brushes of a D.C. generator are moved in order to bring these brushes in magnetic neutral axis, there will be__________?
- In D.C. generators, the brushes on commutator remain in contact with conductors which__________?
- The insulating material used between the commutator segments is normally__________?
- The material for commutator brushes is generally__________?
- In case of a 4-pole D.C. generator provided with a two layer lap winding with sixteen coils, the pole pitch will be__________?
- If B is the flux density, I the length of conductor and v the velocity of conductor, then induced e.m.f. is given by__________?
- If a D.C. generator fails to build up the probable cause could not be__________?
- Brushes of D.C. machines are made of_________?
- In D.C. generators, current to the external circuit from armature is given through__________?
- Iron losses in a D.C. machine are independent of variations in__________?
- Iron losses in a D.C. machine are independent of variations in__________?
- The armature of D.C. generator is laminated to__________?
- Laminations of core are generally made of__________?
- Which of the following could be lamina-proximately the thickness of laminations of a D.C. machine ?
- The commutator segments are connected to the armature conductors by means of__________?
- The resistance of armature winding depends on
- The field coils of D.C. generator are usually made of__________?
- In a commutator__________?
- According to Fleming’s right-hand rule for finding the direction of induced e.m.f., when middle finger points in the direction of induced e.m.f., forefinger will point in the direction of__________?
- While applying Fleming’s right-hand rule to And the direction of induced e.m.f., the thumb points towards__________?
- In D.C. generators the pole shoes are fastened to the pole core by__________?
- Fleming’s right-hand rule regarding direction of induced e.m.f., correlates__________?
- In case of D.C. machines, mechanical losses are primary function of__________?
- Copper brushes in D.C. machine are used__________?
- For a D.C. generator when the number of poles and the number of armature conductors is fixed, then which winding will give the higher e.m.f__________ ?
- In D.C. generators, the cause of rapid brush wear may be__________?
- The bearings used to support the rotor shafts are generally__________?
- In lap winding, the number of brushes is always__________?
- In a four-pole D.C. machine__________?
- A separately excited generator as compared to a self-excited generator__________?