A. increase key length
B. increase key depth
C. increase key width
D. double all the dimensions
E. none of the above
Correct Answer: increase key width ✔
Last Updated: January 25, 2019
Related MCQs
- The value of shear stress which is induced in the shaft due to the applied couple varies__________?
- The safe twisting moment for a compound shaft is equal to the __________?
- A cylindrical section having no joint is known as __________?
- The force acting along the circumference will cause stress in the walls in a direction normal to the longitudinal axis of cylinder; this stress is called__________?
- The weakest section of a diamond riveting is the section which passes through __________?
- Diamond riveted joint can be adopted in the case of following type of joint __________?
- A riveted joint in which the number otrivets decrease from innermost to outer most row is called__________?
- When two plates are butt together and riveted with cover plates with two rows of rivets, the joi;it is known as __________?
- The distance between the centres of the rivets in adjacent rows of zig-zag riveted joint is known as __________?
- In a prismatic member made of two materials so joined that they deform equally under axial stress, the unit stresses in two materials are ?
- A non-yielding support implies that the__________?
- The strain energy stored in a body due to suddenly applied load compared to when it is applied gradually is__________?
- Proof resilience per material is known as__________?
- The maximum strain energy that can be stored in a body is known as__________?
- The energy absorbed in a body, when it is strained within the elastic limits, is known as__________?
- The value of Poisson’s ratio for cast iron is__________?
- Flow stress corresponds to__________?
- The stress at which extension of the material takes place more quickly as compared to the increase in load is called__________?
- The ratio of lateral strain to the linear strain within elastic limit is known as__________?
- Rupture stress is__________?
- In the tensile test, the phenomenon of slow extension of the material, i. e. stress increasing with the time at a constant load is called__________?
- In a tensile test, near the elastic limit zone, the__________?
- The percentage reduction in area of a cast iron specimen during tensile test would be of the order of__________?
- The property of a material by virtue of which it can be beaten or rolled into plates is called __________?
- Poisson’s ratio is defined as the ratio of__________?
- The property of a material by virtue of which a body returns to its original, shape after removal of the load is called__________?
- The buckling load for a given material depends on__________?
- The value of modulus of elasticity for mild steel is of the order of__________?
- If a part is constrained to move and heated, it will develop __________?
- Which is the false statement about true stress-strain method__________?
- For steel, the ultimate strength in shear as compared to in tension is nearly __________?
- True stress-strain curve for materials is plotted between__________?
- Percentage reduction of area in performing tensile test on cast iron may be of the order of__________?
- The impact strength of a material is an index of its __________?
- Strain is defined as the ratio of__________?
- The materials having same elastic properties in all directions are called__________?
- Deformation per unit length in the direction of force is known as__________?
- Young’s modulus is defined as the ratio of __________?