Home
About Us
Contact Us
Privacy Policy
Search
Home
→
Airport Engineering
→
As per ICAO, for airports serving big aircrafts, the crosswind component should not exceed_________________?
Related MCQs
Zero fuel weight of an aircraft is__________?
The length of runway under standard conditions is 2000 m. The elevation of airport site is 300 m. Its reference temperature is 33.05°C. If the runway is to be constructed with an effective gradient of 0.25 percent, the corrected runway length will be__________?
As per ICAO, for A, B, and C type of airports, maximum effective, transverse and longitudinal grades in percentage respectively are__________?
The capacity of parallel runway pattern depends upon__________?
The total length of a runway is 1000 m. The elevation at distance 0,200 m, 400 m, 600 m, 800 m and 1000 m are 100.0 m, 99.2 m, 101.0 m, 101.8 m, 101.4 m and 101.0 m respectively. The effective gradient of runway will be__________?
The minimum width of clearway is__________?
As per International Civil Aviation Organization (ICAO) recommendation, minimum width of safety area for instrumental runway should be__________?
As per ICAO recommendation, the rate of change of longitudinal gradient per 30 m length of vertical curve for A and B type of airports is limited to a maximum of__________?
If the monthly mean of average daily temperature for the hottest month of the year is 25° C and the monthly mean of the maximum daily temperature of the same month of the year is 46° C, the airport reference temperature is__________?
The engine failure case for determining the basic runway length may require__________?
An airport has 4 gates. If the weighted average gate occupancy time is 30 minutes and gate utilisation factor is 0.5, then the capacity of the gate will be__________?
As per ICAO, for airports serving big aircrafts, the crosswind component should not exceed_________________?
A. 15 kmph
B. 25 kmph
C. 35 kmph
D. 45 kmph
Correct Answer:
35 kmph
✔
Last Updated:
January 19, 2019