A. 99.345 m
B. 100.345 m
C. 100.655m
D. 101.870m
Correct Answer: 99.345 m ✔
Last Updated: January 12, 2019
Related MCQs
- The following sights are taken on a “turning point”__________?
- Which of the following errors can be eliminated by taking mean of bot face observations ?
- If altitude bubble is provided both on index frame as well as on telescope of a theodolite, then the instrument is levelled with reference to__________?
- Theodolite is an instrument used for__________?
- Which of the following errors cannot be eliminated by taking both face observations ?
- In the double application of principle of reversion, the apparent error is__________?
- If a tripod settles in the interval that elapses between taking a back sight reading and the following foresight reading, then the elevation of turning point will__________?
- A’level line’is a__________?
- The rise and fall method of levelling provides a complete check on__________?
- In an internal focussing type of telescope, the lens provided is__________?
- The error due to eccentricity of inner and outer axes can be eliminated by__________?
- The adjustment of horizontal cross hair is required particularly when the instrument is used for__________?
- The cross hairs in the surveying telescope are placed__________?
- Which of the following errors is not eliminated by the method of repetition of horizontal angle measurement ?
- For which of the following permanent adjustments of theodolite, the spire test is used ?
- If the lower clamp screw is tightened and upper clamp screw is loosened, the theodolite may be rotated__________?
- Size of a theodolite is specified by__________?
- A telescope is said to be inverted if its__________?
- Which of the following is not the function of levelling head ?
- The process of turning the telescope about the vertical axis in horizontal plane is known as__________?
- The graduations in prismatic compass__________?
- If the magnetic bearing of the sun at a place at noon in southern hemisphere is 167°, the magnetic declination at that place is__________?
- Agate cap is fitted with a__________?
- A negative declination shows that the magnetic meridian is to the__________?
- The prismatic compass and surveyor’s compass__________?
- Local attraction in compass surveying may exist due to__________?
- The horizontal angle between the true meridian and magnetic meridian at a place is called__________?
- In the quadrantal bearing system, a whole circle bearing of 293° 30′ can be expressed as__________?
- In the prismatic compass__________?
- For accurate work, the steel band should always be used in preference to chain because the steel band__________?
- Select the incorrect statement?
- The maximum tolerance in a 20 m chain is__________?
- The length of a chain is measured from__________?
- If the true bearing of a line AB is 269° 30′, then the azimuth of the line AB is__________?
- For a line AB__________?
- Which of the following is not used in measuring perpendicular offsets ?
- Cross staff is an instrument used for__________?
- If the length of a chain is found to be short on testing, it can be adjusted by__________?
- Normal tension is that pull which__________?
- The permissible error in chaining for measurement with chain on rough or hilly ground is__________?
- Which of the following angles can be set out with the help of French cross staff?
- The angle of intersection of the two plane mirrors of an optical square is__________?
- During chaining along a straight line, the . leader of the party has 4 arrows in his hand while the follower has 6. Distance of the follower from the starting point is__________?
- For a well-conditioned triangle, no angle should be less than__________?
- The allowable length of an offset depends upon the__________?
- Which of the following methods of offsets involves less measurement on the ground?
- The correction for sag is__________?