A. radiation
B. intersection
C. resection
D. traversing
Correct Answer: resection ✔
Last Updated: January 12, 2019
Related MCQs
- The two point problem and three point problem are methods of__________?
- The size of a plane table is__________?
- Detailed plotting is generally done by__________?
- The type of surveying which requires least office work is__________?
- Three point problem can be solved by__________?
- Intersection method of detailed plotting is most suitable for__________?
- Benchmark is established by__________?
- A series of closely spaced contour lines represents a__________?
- Closed contours, with higher value inwards, represent a__________?
- Direct method of contouring is__________?
- Which of the following methods of con-touring is most suitable for a hilly terrain ?
- In direct method of contouring, the process of locating or identifying points lying on a contour is called__________?
- Select the correct statement__________?
- An imaginary line lying throughout the surface of ground and preserving a constant inclination to the horizontal is known as__________?
- The difference of levels between two stations A and B is to be determined. For best results, the instrument station should be__________?
- Sensitiveness of a level tube is designated by__________?
- Dumpy level is most suitable when__________?
- Contour interval is__________?
- The suitable contour interval for a map with scale 1 : 10000 is__________?
- If the horizontal distance between the staff point and the point of observation is d, then the error due to curvature of earth is proportional to__________?
- The R.L, of the point A which is on the floor is 100 m and back sight reading on A is 2.455 m. If the foresight reading on the point B which is on the ceiling is 2.745 m, the R.L. of point B will be__________?
- With the rise of temperature, the sensitivity of a bubble tube__________?
- The difference between a level line and a horizontal line is that__________?
- The rise and fall method__________?
- Which of the following errors can be neutralised by setting the level midway between the two stations ?
- If the staff is not held vertical at a level¬ling station, the reduced level calculated from the observation would be__________?
- The sensitivity of a bubble tube can be increased by__________?
- Refraction correction__________?
- As applied to staff readings, the corrections for curvature and refraction are respectively The above table shows a part of a level field book. The value of X should be__________?
- If the R.L. of a B.M. is 100.00 m, the back- sight is 1.215 m and the foresight is 1.870 m, the R.L. of the forward station is__________?
- The following sights are taken on a “turning point”__________?
- Which of the following errors can be eliminated by taking mean of bot face observations ?
- If altitude bubble is provided both on index frame as well as on telescope of a theodolite, then the instrument is levelled with reference to__________?
- Theodolite is an instrument used for__________?
- Which of the following errors cannot be eliminated by taking both face observations ?
- In the double application of principle of reversion, the apparent error is__________?
- If a tripod settles in the interval that elapses between taking a back sight reading and the following foresight reading, then the elevation of turning point will__________?
- A’level line’is a__________?
- The rise and fall method of levelling provides a complete check on__________?
- In an internal focussing type of telescope, the lens provided is__________?
- The error due to eccentricity of inner and outer axes can be eliminated by__________?
- The adjustment of horizontal cross hair is required particularly when the instrument is used for__________?
- The cross hairs in the surveying telescope are placed__________?
- Which of the following errors is not eliminated by the method of repetition of horizontal angle measurement ?
- For which of the following permanent adjustments of theodolite, the spire test is used ?
- If the lower clamp screw is tightened and upper clamp screw is loosened, the theodolite may be rotated__________?
- Size of a theodolite is specified by__________?
- A telescope is said to be inverted if its__________?
- Which of the following is not the function of levelling head ?
- The process of turning the telescope about the vertical axis in horizontal plane is known as__________?
- The graduations in prismatic compass__________?